Products
HYG10ED CO2 adsorption type
HYG10ED is a highly efficient II generation molecular sieve for cryogenic air separation.
Description
marker
▎Product overview
The HYG10ED molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm).
Has a significant adsorption advantage for gases with low CO₂ content (eg air). Compared with conventional HYD10B (13X APG), the CO₂ adsorption capacity is increased by more than 50%, and the operating energy consumption is significantly reduced. Particularly suitable for various large pre-treatment plants in cryogenic air separation.
▎Key benefits
• High adsorption capacity
• High removal efficiency of water, CO₂ and some hydrocarbons
• Suitable for low temperature systems
• Excellent for oxygen production systems
• Provides a long cycle of industrial operation
• Widely proven industrial applications
▎Typical applications
Meets the special requirements of the air separation industry, further increases the adsorption capacity for carbon dioxide and water, and prevents freezing of the column during cryogenic air separation. Suitable for various large cryogenic and PSA air separation plants.
• Deep drying of gases
• Adsorption and removal of CO₂
• Natural gas dehydration
• Processing of high purity gases
▎Standard packaging
136.2 kg, sealed steel drum
▎Precautions
• The product easily absorbs moisture and should not be left in the open air. Store in a dry place.
• After a certain period of adsorption, regeneration can be carried out. The recommended regeneration temperature is not higher than 350 °C.
▎Material/Structure
• Type X zeolite system
• High-capacity microporous structure
• Porous structure suitable for trapping a wider range of contaminants
▎Recommendations for selection
When the process requires high impurity removal capacity, especially in oxygen production, air separation and low temperature gas treatment systems, 13X molecular sieve should be preferred.
▎Frequently Asked Questions
Question: Why is 13X often used in oxygen production and air separation?
Answer: This is because it can effectively remove moisture, CO₂ and other impurities from the air, which is suitable for pre-treatment conditions in air separation systems and PSA oxygen production systems.
contact us
Related Popular Products
HYD10B CO2 adsorption type
The HYD10B molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm). HYD10B molecular sieve has a large porous structure and high adsorption capacity.
Basic dehumidifier series - HYD10A
13X molecular sieve, high capacity adsorption material for air separation, oxygen production and deep gas purification
HYAN200 - adsorbent for chlorine removal
Highly efficient composite adsorption material for deep removal of chlorides from gases and liquids
HYDB100G (Na type, special for industrial oxygen generators)
The special molecular sieve HYDB100G is a sodium aluminosilicate with a crystal lattice pore size of about 9 Å (0.9 nm).
HYZ10G CO2 adsorption type
HYZ10G High efficiency molecular sieve III reinforced for cryogenic air separation (especially for high CO₂ concentrations)
Basic dehumidifier series - HYD03B
Moisture-absorbing adsorption material for dehydration of light alcohols and systems with increased moisture protection
Basic Dryer Series - HYG04DG
Molecular sieve HYG04DG is a sodium aluminosilicate. The 5A molecular sieve has a pore size of approximately 5 Å and is suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
Acrylic acid catalyst
Highly selective catalytic solution for the two-stage oxidation of propylene to produce acrylic acid
Purification of olefins from alcohols-HYAX360
HYAX360 is a modified adsorbent whose optimized composition provides maximum adsorption capacity and low reactivity.
Basic Dryer Series - HYD03C
The HYG03C molecular sieve is a potassium sodium aluminosilicate with a crystal pore size of 3 Å (0.3 nm).
Molecular sieve HYZ05B
Synthetic zeolite with 5 Å pore size for selective removal of H₂S and mercaptans from natural gas and LPG while suppressing COS formation
HYGB100G (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100G is a lithium zeolite with a relatively stable aluminosilicate framework structure.
Drying Type Activated Aluminum Oxide
Highly efficient adsorption dryer for drying systems of industrial gases and liquids.
HYGB500B for oxygen production using pressure swing adsorption method
The special molecular sieve HYGB500B is a calcium-sodium aluminosilicate with a lattice pore size of 5 Å (0.5 nm). Adsorption material for drying light alcohols and for systems with increased requirements for moisture protection.
HYAF200 - adsorbent for removing fluoride from liquids
Irreversible chemical cleaning material for deep removal of fluoride from the liquid phase
Activated Molecular Sieve Powder
Functional powder material for moisture control, foam removal and improved formulation stability.
