Products
HYD10B CO2 adsorption type
The HYD10B molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm). HYD10B molecular sieve has a large porous structure and high adsorption capacity.
Description
marker
▎Product overview
The HYD10B molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm). HYD10B molecular sieve has a large porous structure and high adsorption capacity. It is widely used in industrial processes such as low temperature gas pre-treatment, deep drying, CO₂ removal and LNG/LPG pre-treatment, preventing column freezing during cryogenic air separation process. Suitable for various large cryogenic and PSA air separation plants.
▎Key benefits
• High adsorption capacity
• High removal efficiency of water, CO₂ and some hydrocarbons
• Suitable for low temperature systems
• Excellent for oxygen production systems
• Provides a long cycle of industrial operation
• Widely proven industrial applications
▎Typical applications
Meets the special requirements of the air separation industry, further increases the adsorption capacity for carbon dioxide and water, and prevents freezing of the column during cryogenic air separation. Suitable for various large cryogenic and PSA air separation plants.
• Deep drying of gases
• Adsorption and removal of CO₂
• Natural gas dehydration
• Processing of high purity gases
▎Standard packaging
140 kg, sealed steel drum
▎Precautions
• The product easily absorbs moisture and should not be left in the open air. Store in a dry place.
• After a certain period of adsorption, regeneration can be carried out. The recommended regeneration temperature is not higher than 350 °C.
▎Material/Structure
• Type X zeolite system
• High-capacity microporous structure
• Porous structure suitable for trapping a wider range of contaminants
▎Recommendations for selection
When the process requires high impurity removal capacity, especially in oxygen production, air separation and low temperature gas treatment systems, 13X molecular sieve should be preferred.
▎Frequently Asked Questions
Question: Why is 13X often used in oxygen production and air separation?
Answer: This is because it can effectively remove moisture, CO₂ and other impurities from the air, which is suitable for pre-treatment conditions in air separation systems and PSA oxygen production systems.
contact us
Related Popular Products
Ethylene oxide catalyst
Silver catalytic system for direct oxidation of ethylene to ethylene oxide
HYGB500B for oxygen production using pressure swing adsorption method
The special molecular sieve HYGB500B is a calcium-sodium aluminosilicate with a lattice pore size of 5 Å (0.5 nm). Adsorption material for drying light alcohols and for systems with increased requirements for moisture protection.
Acrolein catalyst
Industrial catalytic system for the selective oxidation of propylene to produce acrolein
HYDB100G (Na type, special for industrial oxygen generators)
The special molecular sieve HYDB100G is a sodium aluminosilicate with a crystal lattice pore size of about 9 Å (0.9 nm).
Basic Dryer Series - HYG04C
The HYG04C molecular sieve is a sodium aluminosilicate with a crystal pore size of 4 Å (0.4 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
HYD08D N2O and HC adsorption type
The HYD08D molecular sieve is a sodium aluminosilicate with a crystal pore size of 8 Å (about 0.8 nm). Designed to remove nitrogen oxides and light hydrocarbons.
Purification of olefins from alcohols-HYAX360
HYAX360 is a modified adsorbent whose optimized composition provides maximum adsorption capacity and low reactivity.
Acrylic acid catalyst
Highly selective catalytic solution for the two-stage oxidation of propylene to produce acrylic acid
HYZ10G CO2 adsorption type
HYZ10G High efficiency molecular sieve III reinforced for cryogenic air separation (especially for high CO₂ concentrations)
Molecular sieve HYZ05B
Synthetic zeolite with 5 Å pore size for selective removal of H₂S and mercaptans from natural gas and LPG while suppressing COS formation
Drying Type Activated Aluminum Oxide
Highly efficient adsorption dryer for drying systems of industrial gases and liquids.
HYG10ED CO2 adsorption type
HYG10ED is a highly efficient II generation molecular sieve for cryogenic air separation.
Basic Dryer Series - HYD05C
The HYD05C molecular sieve is a calcium-sodium aluminosilicate with a crystal pore size of 5 Å (0.5 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
HYGB100G (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100G is a lithium zeolite with a relatively stable aluminosilicate framework structure.
HYAN200 - adsorbent for chlorine removal
Highly efficient composite adsorption material for deep removal of chlorides from gases and liquids
CO conversion catalyst
Catalytic-chemisorption material for deep removal of low concentrations of CO/H₂ in TSA air pre-treatment systems
