Products
HYGB100C (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100C is a lithium zeolite with a relatively stable aluminosilicate framework structure.
Description
marker
▎Product overview
HYGB100C is a special molecular sieve for oxygen production, featuring high nitrogen adsorption capacity, high nitrogen and oxygen separation efficiency, and high dynamic adsorption and desorption rate.
▎Typical applications
It is used to produce oxygen and oxygen-enriched air by short-cycle heat-free adsorption. Compared with conventional calcium and sodium molecular sieves for oxygen production, it has higher adsorption capacity and separation efficiency, making it suitable for use in various VPSA plants.
▎Standard packaging
130kg/sealed steel drum
▎Precautions
The product is hygroscopic; It should not be left open to the air. Storage should be in a dry place.
contact us
Related Popular Products
Molecular sieve HYZ05B
Synthetic zeolite with 5 Å pore size for selective removal of H₂S and mercaptans from natural gas and LPG while suppressing COS formation
Basic Dryer Series - HYG04DG
Molecular sieve HYG04DG is a sodium aluminosilicate. The 5A molecular sieve has a pore size of approximately 5 Å and is suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
Acrylic acid catalyst
Highly selective catalytic solution for the two-stage oxidation of propylene to produce acrylic acid
Basic Dryer Series - HYG04C
The HYG04C molecular sieve is a sodium aluminosilicate with a crystal pore size of 4 Å (0.4 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
CO conversion catalyst
Catalytic-chemisorption material for deep removal of low concentrations of CO/H₂ in TSA air pre-treatment systems
Ethylene oxide catalyst
Silver catalytic system for direct oxidation of ethylene to ethylene oxide
HYG10ED CO2 adsorption type
HYG10ED is a highly efficient II generation molecular sieve for cryogenic air separation.
HYGB500A (PSA-H2) for hydrogen production using PSA method
The special molecular sieve HYGB500A is a calcium-sodium aluminosilicate with a crystal lattice pore size of 5 Å (0.5 nm).
Basic Dryer Series - HYD03C
The HYG03C molecular sieve is a potassium sodium aluminosilicate with a crystal pore size of 3 Å (0.3 nm).
Basic dehumidifier series - HYD10A
13X molecular sieve, high capacity adsorption material for air separation, oxygen production and deep gas purification
Activated Molecular Sieve Powder
Functional powder material for moisture control, foam removal and improved formulation stability.
HYD08D N2O and HC adsorption type
The HYD08D molecular sieve is a sodium aluminosilicate with a crystal pore size of 8 Å (about 0.8 nm). Designed to remove nitrogen oxides and light hydrocarbons.
HYDB100G (Na type, special for industrial oxygen generators)
The special molecular sieve HYDB100G is a sodium aluminosilicate with a crystal lattice pore size of about 9 Å (0.9 nm).
Acrolein catalyst
Industrial catalytic system for the selective oxidation of propylene to produce acrolein
HYAF200 - adsorbent for removing fluoride from liquids
Irreversible chemical cleaning material for deep removal of fluoride from the liquid phase
HYZ10G CO2 adsorption type
HYZ10G High efficiency molecular sieve III reinforced for cryogenic air separation (especially for high CO₂ concentrations)
