Products
HYGB100G (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100G is a lithium zeolite with a relatively stable aluminosilicate framework structure.
Description
marker
▎Product overview
HYGB100G is a special molecular sieve for oxygen production, featuring high nitrogen adsorption capacity, high nitrogen and oxygen separation efficiency, and high dynamic adsorption and desorption rate.
▎Typical applications
It is used to produce oxygen and oxygen-enriched air by short-cycle heat-free adsorption. Compared with conventional calcium and sodium molecular sieves for oxygen production, it has higher adsorption capacity and separation efficiency, making it suitable for use in various VPSA plants.
▎Standard packaging
130kg/sealed steel drum
▎Precautions
The product is hygroscopic; It should not be left open to the air. Storage should be in a dry place.
contact us
Related Popular Products
Basic dehumidifier series - HYD03B
Moisture-absorbing adsorption material for dehydration of light alcohols and systems with increased moisture protection
Basic Dryer Series - HYD05C
The HYD05C molecular sieve is a calcium-sodium aluminosilicate with a crystal pore size of 5 Å (0.5 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
HYAN200 - adsorbent for chlorine removal
Highly efficient composite adsorption material for deep removal of chlorides from gases and liquids
Activated Molecular Sieve Powder
Functional powder material for moisture control, foam removal and improved formulation stability.
Acrolein catalyst
Industrial catalytic system for the selective oxidation of propylene to produce acrolein
Purification of olefins from alcohols-HYAX360
HYAX360 is a modified adsorbent whose optimized composition provides maximum adsorption capacity and low reactivity.
HYGB100C (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100C is a lithium zeolite with a relatively stable aluminosilicate framework structure.
Basic Dryer Series - HYG04C
The HYG04C molecular sieve is a sodium aluminosilicate with a crystal pore size of 4 Å (0.4 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
HYGB500B for oxygen production using pressure swing adsorption method
The special molecular sieve HYGB500B is a calcium-sodium aluminosilicate with a lattice pore size of 5 Å (0.5 nm). Adsorption material for drying light alcohols and for systems with increased requirements for moisture protection.
Drying Type Activated Aluminum Oxide
Highly efficient adsorption dryer for drying systems of industrial gases and liquids.
HYZ10G CO2 adsorption type
HYZ10G High efficiency molecular sieve III reinforced for cryogenic air separation (especially for high CO₂ concentrations)
HYAS200 - activated aluminum oxide for desulfurization
Highly porous adsorption material for selective removal of COS, H₂S, CS₂ and mercaptans from hydrocarbon streams
HYD10B CO2 adsorption type
The HYD10B molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm). HYD10B molecular sieve has a large porous structure and high adsorption capacity.
Acrylic acid catalyst
Highly selective catalytic solution for the two-stage oxidation of propylene to produce acrylic acid
Basic Dryer Series - HYD03C
The HYG03C molecular sieve is a potassium sodium aluminosilicate with a crystal pore size of 3 Å (0.3 nm).
HYD08D N2O and HC adsorption type
The HYD08D molecular sieve is a sodium aluminosilicate with a crystal pore size of 8 Å (about 0.8 nm). Designed to remove nitrogen oxides and light hydrocarbons.
