Products
Basic Dryer Series - HYD05C
The HYD05C molecular sieve is a calcium-sodium aluminosilicate with a crystal pore size of 5 Å (0.5 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
Description
marker
▎Product overview
The HYD05C molecular sieve is a calcium-sodium aluminosilicate with a crystal pore size of 5 Å (0.5 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
▎Key benefits
• Suitable for gas cleaning systems
• High efficiency in removing water and some low molecular weight impurities
• Great for PSA systems
• Provides separation of hydrocarbons
• Suitable for continuous industrial processes
• High layer stability
▎Typical applications
• Removal of H₂O, CO₂, acetylene and other impurities from feed gas in air purification systems.
• Separation of normal and isomeric alkanes in the paraffin industry (fractions C₄~C₆).
• Deep drying and purification of air, O₂, N₂, H₂ and gas mixtures.
• Purification and drying of natural gas, dissociated ammonia gas and other industrial gases and liquids.
• Purification and separation of inert gases.
▎Standard packaging
125 kg, sealed steel drum
▎Precautions
• The product easily absorbs moisture and should not be left in the open air. Store in a dry place.
• After a certain period of adsorption, regeneration can be carried out. The recommended regeneration temperature is not higher than 350 °C.
▎Material/Structure
• Pore size 5 Å
• Zeolite based structure
• Selective adsorption capacity for molecules of a certain size
▎Recommendations for selection
If the process requires both dewatering and a certain gas cleaning and separation capability, the 5A is a very suitable choice, especially for natural gas processing, PSA and hydrocarbon separation scenarios.
▎Frequently Asked Questions
Question: Why is 5A often used for gas cleaning?
Answer: This is because 5A provides a good balance between pore size selectivity and adsorption capacity, which is suitable for purification and separation of industrial gas streams.
contact us
Related Popular Products
Basic Dryer Series - HYG04DG
Molecular sieve HYG04DG is a sodium aluminosilicate. The 5A molecular sieve has a pore size of approximately 5 Å and is suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
HYG10ED CO2 adsorption type
HYG10ED is a highly efficient II generation molecular sieve for cryogenic air separation.
HYZ10G CO2 adsorption type
HYZ10G High efficiency molecular sieve III reinforced for cryogenic air separation (especially for high CO₂ concentrations)
Acrylic acid catalyst
Highly selective catalytic solution for the two-stage oxidation of propylene to produce acrylic acid
Acrolein catalyst
Industrial catalytic system for the selective oxidation of propylene to produce acrolein
Ethylene oxide catalyst
Silver catalytic system for direct oxidation of ethylene to ethylene oxide
HYGB500B for oxygen production using pressure swing adsorption method
The special molecular sieve HYGB500B is a calcium-sodium aluminosilicate with a lattice pore size of 5 Å (0.5 nm). Adsorption material for drying light alcohols and for systems with increased requirements for moisture protection.
HYAX360
HYAX360 is a modified adsorbent whose optimized composition provides optimal adsorption capacity and low reactivity.
HYGB100G (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100G is a lithium zeolite with a relatively stable aluminosilicate framework structure.
HYD10B CO2 adsorption type
The HYD10B molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm). HYD10B molecular sieve has a large porous structure and high adsorption capacity.
Basic dehumidifier series - HYD03B
Moisture-absorbing adsorption material for dehydration of light alcohols and systems with increased moisture protection
Drying Type Activated Aluminum Oxide
Highly efficient adsorption dryer for drying systems of industrial gases and liquids.
HYGB100C (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100C is a lithium zeolite with a relatively stable aluminosilicate framework structure.
Molecular sieve HYZ05B
Synthetic zeolite with 5 Å pore size for selective removal of H₂S and mercaptans from natural gas and LPG while suppressing COS formation
HYGB500A (PSA-H2) for hydrogen production using PSA method
The special molecular sieve HYGB500A is a calcium-sodium aluminosilicate with a crystal lattice pore size of 5 Å (0.5 nm).
Basic Dryer Series - HYD03C
The HYG03C molecular sieve is a potassium sodium aluminosilicate with a crystal pore size of 3 Å (0.3 nm).
