Products
HYZ10G CO2 adsorption type
HYZ10G
High efficiency molecular sieve III reinforced for cryogenic air separation (especially for high CO₂ concentrations)
Description
marker
▎Product overview
HYZ10G molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm).
▎Key benefits
• High adsorption capacity
• High removal efficiency of water, CO₂ and some hydrocarbons
• Suitable for low temperature systems
• Excellent for oxygen production systems
• Provides a long cycle of industrial operation
• Widely proven industrial applications
▎Typical applications
Meets the special requirements of the air separation industry, further increases the adsorption capacity for carbon dioxide and water, and prevents freezing of the column during cryogenic air separation. Suitable for various large cryogenic and PSA air separation plants.
• Deep drying of gases
• Adsorption and removal of CO₂
• Natural gas dehydration
• Processing of high purity gases
▎Standard packaging
136.2 kg, sealed steel drum
▎Precautions
• The product easily absorbs moisture and should not be left in the open air. Store in a dry place.
• After a certain period of adsorption, regeneration can be carried out. The recommended regeneration temperature is not higher than 350 °C.
▎Material/Structure
• Type X zeolite system
• High-capacity microporous structure
• Porous structure suitable for trapping a wider range of contaminants
▎Recommendations for selection
When the process requires high impurity removal capacity, especially in oxygen production, air separation and low temperature gas treatment systems, 13X molecular sieve should be preferred.
▎Frequently Asked Questions
Question: Why is 13X often used in oxygen production and air separation?
Answer: This is because it can effectively remove moisture, CO₂ and other impurities from the air, which is suitable for pre-treatment conditions in air separation systems and PSA oxygen production systems.
contact us
Related Popular Products
Drying Type Activated Aluminum Oxide
Highly efficient adsorption dryer for drying systems of industrial gases and liquids.
Acrolein catalyst
Industrial catalytic system for the selective oxidation of propylene to produce acrolein
HYAN200 - adsorbent for chlorine removal
Highly efficient composite adsorption material for deep removal of chlorides from gases and liquids
HYD10B CO2 adsorption type
The HYD10B molecular sieve is a sodium aluminosilicate with a crystal pore size of 9–10 Å (about 0.9 nm). HYD10B molecular sieve has a large porous structure and high adsorption capacity.
HYAS200 - activated aluminum oxide for desulfurization
Highly porous adsorption material for selective removal of COS, H₂S, CS₂ and mercaptans from hydrocarbon streams
HYG10ED CO2 adsorption type
HYG10ED is a highly efficient II generation molecular sieve for cryogenic air separation.
Molecular sieve HYZ05B
Synthetic zeolite with 5 Å pore size for selective removal of H₂S and mercaptans from natural gas and LPG while suppressing COS formation
Activated Molecular Sieve Powder
Functional powder material for moisture control, foam removal and improved formulation stability.
HYAF200 - adsorbent for removing fluoride from liquids
Irreversible chemical cleaning material for deep removal of fluoride from the liquid phase
Basic Dryer Series - HYD05C
The HYD05C molecular sieve is a calcium-sodium aluminosilicate with a crystal pore size of 5 Å (0.5 nm). Suitable for gas separation and purification systems requiring selective control of pore size. It is widely used in natural gas processing, PSA hydrogen production, hydrocarbon separation, petrochemical pretreatment and industrial gas purification, especially in applications that require the separation of normal hydrocarbons and the removal of specific impurities.
Ethylene oxide catalyst
Silver catalytic system for direct oxidation of ethylene to ethylene oxide
HYGB500A (PSA-H2) for hydrogen production using PSA method
The special molecular sieve HYGB500A is a calcium-sodium aluminosilicate with a crystal lattice pore size of 5 Å (0.5 nm).
CO conversion catalyst
Catalytic-chemisorption material for deep removal of low concentrations of CO/H₂ in TSA air pre-treatment systems
HYGB100C (Li-LSX) Li type, special for industrial oxygen generators
The special molecular sieve HYGB100C is a lithium zeolite with a relatively stable aluminosilicate framework structure.
Basic dehumidifier series - HYD10A
13X molecular sieve, high capacity adsorption material for air separation, oxygen production and deep gas purification
HYDB100G (Na type, special for industrial oxygen generators)
The special molecular sieve HYDB100G is a sodium aluminosilicate with a crystal lattice pore size of about 9 Å (0.9 nm).
